Materials

Tailored Al2O3-Al2TiO5-TiO2 Composite Ceramics from different Titanium Precursors

Publication from Materials
Laser- und Plasma-Technologien

Dittert B., Wiessner M., Angerer P., Lackner J. M., Leichtfried H.

Archives of Metallurgy and Materials 64 (4), 1277-1286, 11/2019

Abstract:

Al2 O3 -Al2 TiO5 -TiO2 composites can be obtained by the infiltration of molecular titanium precursors into presintered α-Al2 O3 (corundum) cylinders. Two titanium tetra alkoxides, and two dialkoxy titanium bis (acetylacetonates) serve as precursors for TiO2 (rutile) and Al2 TiO5 (tialite). The precursors were infiltrated as ethanolic solutions. After sintering at 1550, 1600, and 1650°C, the prepared ceramics’ properties were investigated by SEM, in-situ HT-XRD, and conventional XRD. Titanium tetraisopropoxide leads to the highest content of Al2 TiO5 in the composite. The more reactive the precursor, considering the Al2 O3 /precursor interface, the lower and more anisotropic the grain growth, the more homogeneous is the TiO2 contribution and the higher is the content of Al2 TiO5 . Raising the sintering temperature causes an increase of the crystalline Al2 TiO5 content as well as of the grain growth. Moreover, the reactivity of the precursor molecule influences the Ti/(Al+Ti) ratio in the obtained tialite phase.