Back to homepage
  • search open search
  • AA
  • Menü menu
  • menu open menu

DI Dr. Wolfgang Waldhauser

Role

Head of research group

Research group

MATERIALS:

Laser and Plasma Processing

Phone number

+43 316 876-3300

E-mail

Wolfgang.Waldhauser@joanneum.at

Address

Leobner Straße 94a, 8712, Niklasdorf
+43 316 876-3304
MATERIALSNiklasdorf-Sek@joanneum.at

Publications

Materials
2025

Cerium-containing hexamethyldisiloxane coatings for corrosion protection of a laser-based powder bed fusion fabricated AlSi10Mg0.3 alloy

Authors Mirjam Spuller, Nina Kovač, Peter Rodič, Lukasz Major, Simon Chwatal, Mattia Cabrioli, Matteo Vanazzi, Giorgio De Pasquale, Juergen M. Lackner, Reinhard Kaindl, Wolfgang Waldhauser,
Cerium-containing hexamethyldisiloxane coatings for corrosion protection of a laser-based powder bed fusion fabricated AlSi10Mg0.3 alloy
Materials
2025

Screen and stencil printed graphene heat spreaders on printed circuit boards for lowering of light emitting diode temperatures

Authors Reinhard Kaindl, David Dergez, Tushar Gupta, Songfeng Pei, Peng-Xiang Hou, Jinhong Du, Chang Liu, Bernhard Fickl, Martin Nastran, Ya Liu, Alexander Blümel, Dominik Eder, Johan Liu, Wencai Ren, Paul Hartmann, Wolfgang Waldhauser, Dietmar Kieslinger, Bernhard C. Bayer
Screen and stencil printed graphene heat spreaders on printed circuit boards for lowering of light emitting diode temperatures
Materials
2024

Shrouding Gas Plasma Deposition Technique for Developing Low-Friction, Wear-Resistant WS2-Zn Thin Films on Unfilled PEEK: The Relationship Between Process and Coating Properties

Authors Kopp, D.; Bandl, C.; Kaindl, R.; Prethaler, T.; Coclite, A.M.; Waldhauser, W.
Shrouding Gas Plasma Deposition Technique for Developing Low-Friction, Wear-Resistant WS2-Zn Thin Films on Unfilled PEEK: The Relationship Between Process and Coating Properties
Materials
2024

Simulation-based Analysis of the Atmospheric Pressure Plasma and Its Temperature Distribution Using Ansys Mechanical

Authors Chwatal Simon, Parizek Harald, Waldhauser Wolfgang
Simulation-based Analysis of the Atmospheric Pressure Plasma and Its Temperature Distribution Using Ansys Mechanical
Materials
2024

L-PBF of the Metastable β Titanium Alloy Ti-5553: Microstructure and Mechanical Properties

Authors Meier, B., Petrusa, J. & Waldhauser
L-PBF of the Metastable β Titanium Alloy Ti-5553: Microstructure and Mechanical Properties
Materials
2024

Shrouding Gas Plasma Deposition Technique for Developing Low-Friction, Wear-Resistant WS2-Zn Thin Films on Unfilled PEEK: The Relationship Between Process and Coating Properties

Authors Bandl, C., Kopp, D., Kaindl, R., Prethaler, T., Coclite, A. M., & Waldhauser, W.
Shrouding Gas Plasma Deposition Technique for Developing Low-Friction, Wear-Resistant WS2-Zn Thin Films on Unfilled PEEK: The Relationship Between Process and Coating Properties
Materials
2024

Corrosion protection of additive manufactured AlSi10Mg0.3 using PMMA-siloxane silica sol-gel coating

Authors Kovač, Nina & Spuller, Mirjam & Kapun, Barbara & Milošev, Ingrid & Lackner, Juergen & Kaindl, Reinhard & Waldhauser, W. & Cabrioli, Mattia & Pasquale, Giorgio & Rodič, Peter
Corrosion protection of additive manufactured AlSi10Mg0.3 using PMMA-siloxane silica sol-gel coating
Materials
2023

Development of Ternary Atmospheric Plasma Deposited Coatings Generated Under Low Oxygen Conditions with Low-Friction Properties on Thermoplastic Surfaces

Authors Kopp, Dietmar; Gleirscher, Milena; Stummer, Maximilian; Major, Łukasz; Hausberger, Andreas; Schlögl, Sandra; Lackner, Jürgen; Kaindl, Reinhard; Prethaler, Thomas; Coclite, Anna; Waldhauser, W.
Development of Ternary Atmospheric Plasma Deposited Coatings Generated Under Low Oxygen Conditions with Low-Friction Properties on Thermoplastic Surfaces
Materials
2023

Toward a sustainable laser powder bed fusion of Ti 6Al 4 V: Powder reuse and its effects on material properties during a single batch regime

Authors Meier, Benjamin; Warchomicka, Fernando; Ehgartner, Daniela; Schuetz, Denis; Angerer, Paul; Wosik, Jaroslaw; Belei, Carlos; Petrusa, Jelena; Kaindl, Reinhard; Waldhauser, W.; Sommitsch, Christof
Toward a sustainable laser powder bed fusion of Ti 6Al 4 V: Powder reuse and its effects on material properties during a single batch regime
Materials
2023

Surface Topography and Biocompatibility of cp-Ti Grade2 Fabricated by Laser-Based Powder Bed Fusion: Influence of Printing Orientation and Surface Treatments

Authors Petrusa, Jelena; Meier, Benjamin; Grünbacher, Gerda; Waldhauser, Wolfgang; Eckert, Jürgen
Surface Topography and Biocompatibility of cp-Ti Grade2 Fabricated by Laser-Based Powder Bed Fusion: Influence of Printing Orientation and Surface Treatments
Materials
2023

Monitoring concept for powder flow monitoring in Laser-Directed Energy Deposition (L-DED) process based on flexible piezoelectric sensors

Authors Petrovic-Filipovic, Vojislav; Görgl, Richard; Suppan, Michael; Hesse, Jan; Waldhauser, Wolfgang
Monitoring concept for powder flow monitoring in Laser-Directed Energy Deposition (L-DED) process based on flexible piezoelectric sensors
Materials
2023

Single- and Multilayer Build-Up of an Antibacterial Temperature- and UV-Curing Sol–Gel System with Atmospheric Pressure Plasma

Authors Chwatal, Simon; Pölzl, Sabine; Kittinger, Clemens; Lackner, Jürgen; Coclite, Anna; Waldhauser, W.
Single- and Multilayer Build-Up of an Antibacterial Temperature- and UV-Curing Sol–Gel System with Atmospheric Pressure Plasma
Materials
2023

Morphology-controlled atmospheric pressure plasma synthesis of zinc oxide nanoparticles for piezoelectric sensors

Authors Schwan, A.; Chwatal, Simon; Hendler, C.; Kopp, Dietmar; Lackner, Juergen M; Kaindl, Reinhard; Tscherner, M.; Zirkl, M.; Angerer, P.; Friessnegger, Bernhard; Augl, S.; Heim, D.; Hinterer, A.; Stummer, Maximilian; Waldhauser, W.
Morphology-controlled atmospheric pressure plasma synthesis of zinc oxide nanoparticles for piezoelectric sensors
Materials
2023

Originalarbeit High Temperature Tensile Strength of TI6AL4V Processed by L-PBF-Influence of Microstructure and Heat Treatment

Authors Meier, Benjamin; Warchomicka, Fernando; Petrusa, Jelena; Kaindl, Reinhard; Waldhauser, W.; Sommitsch, Christof
Originalarbeit High Temperature Tensile Strength of TI6AL4V Processed by L-PBF-Influence of Microstructure and Heat Treatment
Materials
2023

High Temperature Tensile Strength of TI6AL4V Processed by L-PBF–Influence of Microstructure and Heat Treatment

Authors Meier, Benjamin; Warchomicka, Fernando; Petrusa, Jelena; Kaindl, Reinhard; Waldhauser, Wolfgang; Sommitsch, Christof
High Temperature Tensile Strength of TI6AL4V Processed by L-PBF–Influence of Microstructure and Heat Treatment
Materials
2023

Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structure

Authors Dietmar Kopp, Milena Gleirscher, Maximilian Stummer, Lukasz Major, Andreas Hausberger, Sandra Schlögl, Jürgen M. Lackner, Reinhard Kaindl, Thomas Prethaler, Anna Maria Coclite, Wolfgang Waldhauser
Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structure
Materials
2022

Influence of Different Surface- and Heat Treatments; Elevated Temperature, Orientation on the Fatigue Properties of Ti6Al4V Processed by L-PBF for Controlled Powder Properties

Authors Meier, Benjamin; Warchomicka, Fernando; Kaindl, Reinhard; Sommitsch, Christoph; Waldhauser, Wolfgang
Influence of Different Surface- and Heat Treatments; Elevated Temperature, Orientation on the Fatigue Properties of Ti6Al4V Processed by L-PBF for Controlled Powder Properties
Materials
2022

Surface topography and biocompatibility of cp‐Ti Grade2 fabricated by LB‐PBF: Influence of printing orientation and surface treatments

Authors Petrusa, Jelena; Meier, Benjamin; Grünbacher, Gerda; Waldhauser, W.; Eckert, Jürgen
Surface topography and biocompatibility of cp‐Ti Grade2 fabricated by LB‐PBF: Influence of printing orientation and surface treatments
Materials
2022

Cross-linking processes in antimicrobial UV-sol-gel systems initiated by atmospheric pressure plasma

Authors Chwatal, S.; Stummer, M.; Steiner, H.; Brandner, A.; Pölzl, S.; Kittinger, C.; Lackner, J. M.; Hinterer, A.; Waldhauser, W.; Coclite, A. M.
Cross-linking processes in antimicrobial UV-sol-gel systems initiated by atmospheric pressure plasma
Materials
2022

Low-friction, wear-protecting coatings on polymers by atmospheric pressure plasma spraying

Authors Kopp, Dietmar; Lackner, Jürgen M.; Kaindl, Reinhard; Elter, Roswitha; Stummer, Maximilian; Hinterer, Andreas; Coclite, Anna Maria; Waldhauser, Wolfgang
Low-friction, wear-protecting coatings on polymers by atmospheric pressure plasma spraying
Materials
2022

Influence of powder production process and properties on material properties of Ti6Al4V manufactured by L-PBF

Authors Meier, Benjamin; Warchomicka, Fernando; Petrusa, Jelena; Angerer, Paul; Wosik, Jaroslaw; Kaindl, Reinhard; Petrovic, Vojislav; Waldhauser, Wolfgang; Sommitsch, Christof
Influence of powder production process and properties on material properties of Ti6Al4V manufactured by L-PBF
Materials
2022

Atomic layer deposition of oxide coatings on porous metal and polymer structures fabricated by additive manufacturing methods (laser-based powder bed fusion, material extrusion, material jetting)

Authors Kaindl, Reinhard; Homola, Tomáš; Rastelli, Armando; Schwarz, Albin; Tarre, Aivar; Kopp, Dietmar; Coclite, Anna Maria; Görtler, Michael; Meier, Benjamin; Prettenthaler, Bernd; Belegratis, Maria; Lackner, Jürgen M.; Waldhauser, Wolfgang
Atomic layer deposition of oxide coatings on porous metal and polymer structures fabricated by additive manufacturing methods (laser-based powder bed fusion, material extrusion, material jetting)
Materials
2022

Influences of Surface, Heat Treatment, and Print Orientation on the Anisotropy of the Mechanical Properties and the Impact Strength of Ti 6Al 4V Processed by Laser Powder Bed Fusion

Authors Meier, Benjamin; Godja, Norica; Warchomicka, Fernando; Belei, Carlos; Schäfer, Sandra; Schindel, Andreas; Palcynski, Gregor; Kaindl, Reinhard; Waldhauser, Wolfgang; Sommitsch, Christof
Influences of Surface, Heat Treatment, and Print Orientation on the Anisotropy of the Mechanical Properties and the Impact Strength of Ti 6Al 4V Processed by Laser Powder Bed Fusion
Materials
2021

Aerosol Jet Printing of Graphene and Carbon Nanotube Patterns on Realistically Rugged Substrates

Authors Kaindl, Reinhard; Gupta, Tushar; Blümel, Alexander; Pei, Songfeng; Hou, Peng-Xiang; Du, Jinhong; Liu, Chang; Patter, Paul; Popovic, Karl; Dergez, David; Elibol, Kenan; Schafler, Erhard; Liu, Johan; Eder, Dominik; Kieslinger, Dietmar; Ren, Wencai; Hartmann, Paul; Waldhauser, Wolfgang; Bayer, Bernhard C.
Aerosol Jet Printing of Graphene and Carbon Nanotube Patterns on Realistically Rugged Substrates
Materials
2018

Atomic-Scale in Situ Observations of Crystallization and Restructuring Processes in Two-Dimensional MoS2 Films

Authors Bayer, Bernhard C.; Kaindl, Reinhard; Reza Ahmadpour Monazam, Mohammad; Susi, Toma; Kotakoski, Jani; Gupta, Tushar; Eder, Dominik; Waldhauser, Wolfgang; Meyer, Jannik C.
Atomic-Scale in Situ Observations of Crystallization and Restructuring Processes in Two-Dimensional MoS2 Films
Materials
2018

Anode layer source plasma-assisted hybrid deposition and characterization of diamond-like carbon coatings deposited on flexible substrates

Authors Thirumalai, S.; Hausberger, A.; Lackner, J. M.; Waldhauser, W.; Schwarz, T.
Anode layer source plasma-assisted hybrid deposition and characterization of diamond-like carbon coatings deposited on flexible substrates
Materials
2017

Investigations on Plasmonic Color Tuning Coating on c-Si Solar Cells

Authors Peharz, Gerhard; Waldhauser, Wolfgang; Prietl, Christine; Großschädl, Bettina; Schubert, Martin C.; Michl, Bernhard
Investigations on Plasmonic Color Tuning Coating on c-Si Solar Cells
Materials
2017

Application of plasmonic coloring for making building integrated PV modules comprising of green solar cells

Authors Peharz, Gerhard; Berger, Karl; Kubicek, Bernhard; Aichinger, Martin; Grobbauer, Michael; Gratzer, Julia; Nemitz, Wolfgang; Großschädl, Bettina; Auer, Christine; Prietl, Christine; Waldhauser, Wolfgang; Eder, Gabriele C.
Application of plasmonic coloring for making building integrated PV modules comprising of green solar cells
Materials
2017

Biodegradation of anti-microbial titanium-magnesium-silver coatings on polyetheretherketone for bone-contact applications

Authors Gümüş, Serap; Polat, Şeyda; Waldhauser, Wolfgang; Lackner, Juergen M.
Biodegradation of anti-microbial titanium-magnesium-silver coatings on polyetheretherketone for bone-contact applications
Materials
2017

Growth, structure and stability of sputter-deposited MoS2 thin films

Authors Kaindl, Reinhard; Bayer, Bernhard C.; Resel, Roland; Müller, Thomas; Skakalova, Viera; Habler, Gerlinde; Abart, Rainer; Cherevan, Alexey S.; Eder, Dominik; Blatter, Maxime; Fischer, Fabian; Meyer, Jannik C.; Polyushkin, Dmitry K.; Waldhauser, Wolfgang
Growth, structure and stability of sputter-deposited MoS2 thin films
Materials
2016

Effect of the type of elastomeric substrate on the microstructural, surface and tribological characteristics of diamond-like carbon (DLC) coatings

Authors Thirumalai, S.; Hausberger, A.; Lackner, J. M.; Waldhauser, W.; Schwarz, Th
Effect of the type of elastomeric substrate on the microstructural, surface and tribological characteristics of diamond-like carbon (DLC) coatings
Materials
2015

Roughness Influence On Macro- And Micro-Tribology Of Multi-Layered Hard Coatings On Carbon Fibre Polymer Composite

Authors J.M, Lackner; B, Major; W, Waldhauser; A, Mzyk; Ł, Major; M, Kot
Roughness Influence On Macro- And Micro-Tribology Of Multi-Layered Hard Coatings On Carbon Fibre Polymer Composite
Materials
2015

Dry And Ringer Solution Lubricated Tribology Of Thin Osseoconductive Metal Oxides And Diamond-Like Carbon Films

Authors W, Waldhauser; M, Lackner J.; M, Kot; B, Major
Dry And Ringer Solution Lubricated Tribology Of Thin Osseoconductive Metal Oxides And Diamond-Like Carbon Films
Materials
2015

Synthesis of Graphene-layer Nanosheet Coatings by PECVD

Authors Kaindl, Reinhard; Jakopic, Georg; Resel, Roland; Pichler, Jeanine; Fian, Alexander; Fisslthaler, Evelin; Grogger, Werner; Bayer, Bernhard C.; Fischer, Roland; Waldhauser, Wolfgang
Synthesis of Graphene-layer Nanosheet Coatings by PECVD
Materials
2015

Nano-wrinkling of diamond-like carbon thin films on amorphous polycarbonate and semicrystalline polyethylene terephthalate

Authors Lackner, J. M.; Gumus, S.; Polat, S.; Waldhauser, W.
Nano-wrinkling of diamond-like carbon thin films on amorphous polycarbonate and semicrystalline polyethylene terephthalate
Materials
2014

Plasma Polymerization Inside Tubes in Hexamethyldisiloxanes and Ethyne Glow Discharges: Effects of Deposition Atmosphere on Wetting and Ageing in Solvents

Authors Lackner, Juergen M.; Wiesinger, Martin; Kaindl, Reinhard; Waldhauser, Wolfgang; Heim, Daniel; Hartmann, Paul
Plasma Polymerization Inside Tubes in Hexamethyldisiloxanes and Ethyne Glow Discharges: Effects of Deposition Atmosphere on Wetting and Ageing in Solvents
Materials
2014

The advantages of incorporating CrxC nanograins into an a-C:H matrix in tribological coatings

Authors Kot, M.; Major, Ł; Chronowska-Przywara, K.; Lackner, J. M.; Waldhauser, W.; Rakowski, W.
The advantages of incorporating CrxC nanograins into an a-C:H matrix in tribological coatings
Materials
2014

Tribology and Micromechanics of Chromium Nitride Based Multilayer Coatings on Soft and Hard Substrates

Authors Lackner, Juergen M.; Waldhauser, Wolfgang; Major, Lukasz; Kot, Marcin
Tribology and Micromechanics of Chromium Nitride Based Multilayer Coatings on Soft and Hard Substrates
Materials
2014

Growth of biomimetic films - influences of polymer topography and phase structure

Authors Lackner, Juergen M.; Gümüş, Serap; Polat, Seyda; Major, Lukasz; Waldhauser, Wolfgang
Growth of biomimetic films - influences of polymer topography and phase structure
Materials
2014

Bio-mimetic design for surface protection of plastic materials based on properties of human skin

Authors Lackner, Juergen M; Waldhauser, W.
Bio-mimetic design for surface protection of plastic materials based on properties of human skin
Materials
2014

Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites

Authors Lackner, Juergen M.; Waldhauser, Wolfgang; Ganser, Christian; Teichert, Christian; Kot, Marcin; Major, Lukasz
Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites
Materials
2013

TRIBOLOGY OF BIO-INSPIRED NANOWRINKLED FILMS ON ULTRASOFT SUBSTRATES

Authors Lackner, Juergen M.; Waldhauser, Wolfgang; Major, Lukasz; Teichert, Christian; Hartmann, Paul
TRIBOLOGY OF BIO-INSPIRED NANOWRINKLED FILMS ON ULTRASOFT SUBSTRATES
Materials
2013

WITHDRAWN: Bio-inspired wear protection of soft materials by hard films: Mechanical and tribological properties of nacre and multilayer Ti–TiN films

Authors Lackner, Juergen M; Waldhauser, W.; Hartmann, P.; Major, L.; Kot, Marcin
WITHDRAWN: Bio-inspired wear protection of soft materials by hard films: Mechanical and tribological properties of nacre and multilayer Ti–TiN films
Materials
2013

Gas Permeation, Mechanical Behavior and Cytocompatibility of Ultrathin Pure and Doped Diamond-Like Carbon and Silicon Oxide Films

Authors Lackner, Juergen M.; Meindl, Claudia; Wolf, Christian; Fian, Alexander; Kittinger, Clemens; Kot, Marcin; Major, Lukasz; Czibula, Caterina; Teichert, Christian; Waldhauser, Wolfgang; Weinberg, Annelie-Martina; Fröhlich, Eleonore
Gas Permeation, Mechanical Behavior and Cytocompatibility of Ultrathin Pure and Doped Diamond-Like Carbon and Silicon Oxide Films
Materials
2013

Plastic deformation in nano-scale multilayer materials — A biomimetic approach based on nacre

Authors Lackner, Juergen M.; Waldhauser, Wolfgang; Major, Boguslaw; Major, Lukasz; Kot, Marcin
Plastic deformation in nano-scale multilayer materials — A biomimetic approach based on nacre
Materials
2013

Biomimetics in thin film design – Wrinkling and fracture of pulsed laser deposited films in comparison to human skin

Authors Lackner, J. M.; Waldhauser, W.; Major, R.; Major, L.; Hartmann, P.
Biomimetics in thin film design – Wrinkling and fracture of pulsed laser deposited films in comparison to human skin
Materials
2012

Biomimetik design for cell-contacting surfaces-The topographical influences on cell-biomaterial interaction and plasma-based fabrication methods for self-adapted nanostructures

Authors Lackner, Jürgen Markus; Waldhauser, Wolfgang; Schmied, Franz; Teichert, Christian; Keckes, Jozef; Kreith, Josef
Biomimetik design for cell-contacting surfaces-The topographical influences on cell-biomaterial interaction and plasma-based fabrication methods for self-adapted nanostructures
Materials
2012

Biologisch-inspirierte Oberflächen für Verschleißschutz und Reibungsminimierung von Kunststoffen - Biomimetische Entwicklung von neuen Materialien basierend auf menschlicher Haut und Perlmutt

Authors J.M.Lackner, L.Major, W.Waldhauser, M.Kot
Biologisch-inspirierte Oberflächen für Verschleißschutz und Reibungsminimierung von Kunststoffen - Biomimetische Entwicklung von neuen Materialien basierend auf menschlicher Haut und Perlmutt
Materials
2012

Biomimetic approaches for designing blood-contacting surfaces for artificial vessels - a review

Authors J.M. Lackner, P. Hartmann, W. Waldhauser, R. Major
Biomimetic approaches for designing blood-contacting surfaces for artificial vessels - a review
Materials
2012

Biomimetic design for cell-contacting surfaces

Authors J.M. Lackner, J. Kreith, W. Waldhauser, P. Hartmann, C. Teichert, F. Schmied, L. Major, J. Keckes
Biomimetic design for cell-contacting surfaces
Materials
2012

Hemocompatibility of Inorganic Physical Vapor Deposition (PVD) Coatings on Thermoplastic Polyurethane Polymers.

Authors Lackner, Juergen M.; Waldhauser, Wolfgang; Hartmann, Paul; Bruckert, Franz; Weidenhaupt, Marianne; Major, Roman; Sanak, Marek; Wiesinger, Martin; Heim, Daniel
Hemocompatibility of Inorganic Physical Vapor Deposition (PVD) Coatings on Thermoplastic Polyurethane Polymers.
Materials
2012

Self-assembling (nano-)wrinkling topography formation in low-temperature vacuum deposition on soft polymer surfaces

Authors Lackner, J. M.; Waldhauser, W.; Hartmann, P.; Miskovics, O.; Schmied, F.; Teichert, C.; Schöberl, T.
Self-assembling (nano-)wrinkling topography formation in low-temperature vacuum deposition on soft polymer surfaces
Materials
2012

Vakuumbeschichtung bei Raumtemperatur: F&E zur Funktionalisierung von Oberflächen für Optik, Verschleißschutz und Medizintechnik von temperaturempfindlichen Materialien

Authors J.M. Lackner, P. Hartmann, W. Waldhauser
Vakuumbeschichtung bei Raumtemperatur: F&E zur Funktionalisierung von Oberflächen für Optik, Verschleißschutz und Medizintechnik von temperaturempfindlichen Materialien
Materials
2011

Corrosion Properties of DLC-Coated Stainless Steel in Hanks Solution for Biomedical Applications

Authors Merl, Darja Kek; Panjan, Peter; Čekada, Miha; Kahn, Markus; Waldhauser, Wolfgang
Corrosion Properties of DLC-Coated Stainless Steel in Hanks Solution for Biomedical Applications
Materials
2011

Deposition of silicon doped and pure hydrogenated amorphous carbon coatings on quartz crystal microbalance sensors for protein adsorption studies

Authors Kargl, Rupert; Kahn, Markus; Köstler, Stefan; Reischl, Martin; Doliška, Aleš; Stana-Kleinschek, Karin; Waldhauser, Wolfgang; Ribitsch, Volker
Deposition of silicon doped and pure hydrogenated amorphous carbon coatings on quartz crystal microbalance sensors for protein adsorption studies
Materials
2011

Plasma modification and deposition on inner tube faces by pulsed DC discharges

Authors Lackner, Jürgen M.; Kahn, Markus; Waldhauser, Wolfgang
Plasma modification and deposition on inner tube faces by pulsed DC discharges
Materials
2011

Tribological properties of diamond-like carbon coatings prepared by anode layer source and magnetron sputtering

Authors Paskvale, S.; Kahn, M.; Čekada, M.; Panjan, P.; Waldhauser, W.; Podgornik, B.
Tribological properties of diamond-like carbon coatings prepared by anode layer source and magnetron sputtering
Materials
2011

Verformungsmechanismen in Ti-TiN-Multilagenbeschichtungen unter tribologischen Beanspruchungen

Authors J.M. Lackner, B. Major, L. Major, M. Kot, W. Waldhauser
Verformungsmechanismen in Ti-TiN-Multilagenbeschichtungen unter tribologischen Beanspruchungen
Materials
2010

The relationship between structure and mechanical properties of hydrogenated amorphous carbon films

Authors Kahn, M.; Paskvale, S.; Čekada, M.; Schöberl, T.; Waldhauser, W.; Mitterer, C.; Pelicon, P.; Brandstätter, E.
The relationship between structure and mechanical properties of hydrogenated amorphous carbon films
Materials
2010

Biokompatible PVD-Beschichtung auf dreidimensional geformten Oberflächen

Authors J.M.Lackner, W.Waldhauser, M.Kahn
Biokompatible PVD-Beschichtung auf dreidimensional geformten Oberflächen
Materials
2010

Diamond and Diamond-like Carbon Coated Surfaces as Biomaterials

Authors Lackner, Jürgen M.; Waldhauser, Wolfgang
Diamond and Diamond-like Carbon Coated Surfaces as Biomaterials
Materials
2010

Hemocompatible, pulsed laser deposited coatings on polymers.

Authors Lackner, Juergen M.; Waldhauser, Wolfgang; Major, Roman; Major, Boguslaw; Bruckert, Franz
Hemocompatible, pulsed laser deposited coatings on polymers.
Materials
2010

Mechanisms for self-assembling topography formation in low-temperature vacuum deposition of inorganic coatings on polymer surfaces

Authors Lackner, Juergen M; Waldhauser, W.; Alamanou, A; Teichert, Christian; Schmied, Franz; Major, L; Major, B
Mechanisms for self-assembling topography formation in low-temperature vacuum deposition of inorganic coatings on polymer surfaces
Materials
2010

Nanostrukturierte Schichten - der Schlüssel zu multifunktionalen Oberflächen

Authors Mitterer, Christian; Waldhauser, Wolfgang
Nanostrukturierte Schichten - der Schlüssel zu multifunktionalen Oberflächen
Materials
2010

Raman Spectroscopy of Carbon Based Films - Spectra Interpretation and Selected Applications

Authors Kahn, Markus; Waldhauser, Wolfgang
Raman Spectroscopy of Carbon Based Films - Spectra Interpretation and Selected Applications
Materials
2009

Process Benefits of Wide Area, Low Energy End-Hall Ion Source for Surface Pre- Cleaning and Functional Treatment of Polymeric Substrate Materials

Authors Lackner, Juergen M.; Waldhauser, Wolfgang; Mahoney, Leonard J.; Davis, John
Process Benefits of Wide Area, Low Energy End-Hall Ion Source for Surface Pre- Cleaning and Functional Treatment of Polymeric Substrate Materials
Materials
2009

RF deposition of soft hydrogenated amorphous carbon coatings for adhesive interfaces on highly elastic polymer materials

Authors Lackner, Juergen M.; Major, Roman; Major, Lukasz; Schöberl, Thomas; Waldhauser, Wolfgang
RF deposition of soft hydrogenated amorphous carbon coatings for adhesive interfaces on highly elastic polymer materials
Materials
2009

Structural and mechanical properties of diamond-like carbon films deposited by an anode layer source

Authors Kahn, Markus; Čekada, Miha; Schöberl, Thomas; Berghauser, Roswitha; Mitterer, Christian; Bauer, Christoph; Waldhauser, Wolfgang; Brandstätter, Elmar
Structural and mechanical properties of diamond-like carbon films deposited by an anode layer source
Materials
2009

Vakuumbeschichtungen in der Medizintechnik: Grundlagen für biokompatible Anwendungen - Verfahren und Produkte - Probleme und Risken

Authors Lackner J.M., Waldhauser W.
Vakuumbeschichtungen in der Medizintechnik: Grundlagen für biokompatible Anwendungen - Verfahren und Produkte - Probleme und Risken
Materials
2008

Accurate Raman spectroscopy of diamond-like carbon films deposited by an anode layer source

Authors Kahn, M.; Cekada, M.; Berghauser, R.; Waldhauser, W.; Bauer, C.; Mitterer, C.; Brandstätter, E.
Accurate Raman spectroscopy of diamond-like carbon films deposited by an anode layer source
Materials
2008

Beschichtung von metallischen Membranen mittels Pulsed Laser Deposition

Authors Lackner, J.M.; Mukherji, D.; Waldhauser, W.; Wanderka, N.; Kardjilov, N.; Näth, O.; Jäger, S.; Schmitz, F.; Rösler, J.
Beschichtung von metallischen Membranen mittels Pulsed Laser Deposition
Materials
2008

Industrially scaled pulsed laser deposition based coating techniques for the realization of hemocompatible surfaces for blood contact applications

Authors Lackner, Juergen M; Waldhauser, W.; Major, Roman; Major, Boguslaw; Czarnowska, Elzbieta; Bruckert, Franz
Industrially scaled pulsed laser deposition based coating techniques for the realization of hemocompatible surfaces for blood contact applications
Materials
2008

Kinetics of eukaryote cells adhesion under shear flow detachment on the PLD deposited surfaces

Authors Major, R; Bruckert, Franz; Lackner, Juergen M; Waldhauser, W.; Pietrzyk, M; Major, B
Kinetics of eukaryote cells adhesion under shear flow detachment on the PLD deposited surfaces
Materials
2008

Polymer pre-treatment by linear anode layer source plasma for adhesion improvement of sputtered TiN coatings

Authors Lackner, Juergen M.; Waldhauser, Wolfgang; Schwarz, Manfred; Mahoney, Leonard; Major, Lukasz; Major, Boguslaw
Polymer pre-treatment by linear anode layer source plasma for adhesion improvement of sputtered TiN coatings
Materials
2007

Properties of TiO2 thin films deposited by RF magnetron sputtering

Authors Sima, Cornelia; Waldhauser, W.; Lackner, Juergen M; Kahn, Markus; Nicolae, Ionut; Viespe, Cristian; Grigoriu, C.; Manea, A.
Properties of TiO2 thin films deposited by RF magnetron sputtering
Materials
2007

Properties of DLC and Nitrogen-Doped DLC Films Deposited by DC Magnetron Sputtering

Authors Kahn, Markus; Menegazzo, Nicola; Mizaikoff, Boris; Berghauser, Roswitha; Lackner, Juergen M; Hufnagel, Daniel; Waldhauser, W.
Properties of DLC and Nitrogen-Doped DLC Films Deposited by DC Magnetron Sputtering
Materials
2007

Growth Morphology, Adhesion and Mechanical Properties of Room-Temperature Pulsed Laser Deposited Cr-CrN Multilayer Coatings

Authors Lackner, Jürgen M.; Waldhauser, Wolfgang; Kahn, Markus; Berghauser, Roswitha; Hufnagel, Daniel; Major, Roman; Major, Lukasz; Major, Boguslaw
Growth Morphology, Adhesion and Mechanical Properties of Room-Temperature Pulsed Laser Deposited Cr-CrN Multilayer Coatings
Materials
2007

Using of laser ablation to fabrication nanocrystalline multilayer coatings for biomedical and tribological application

Authors Major, Boguslaw; Major, Roman; Lackner, Juergen M; Waldhauser, W.
Using of laser ablation to fabrication nanocrystalline multilayer coatings for biomedical and tribological application
Materials
2007

Synthesis and optimization of tungsten and tungsten oxide films produced by laser ablation

Authors Shuntaro, S.; Suzuki, T.; Hirai, M.; Suematsu, H.; Grigoriu, C.; Sima, C.; Nicolae, I.; Waldhauser, W.; Lackner, J. M.
Synthesis and optimization of tungsten and tungsten oxide films produced by laser ablation
Materials
2007

Haftungssteigerung von PVD-Beschichtungen durch Plasmabehandlung mit gitterlosen Anode-Layer-Source-Ionenquellen

Authors Lackner, Juergen M; Heinz, Walther; Waldhauser, W.; Brandstätter, Elmar; Schwarz, Manfred
Haftungssteigerung von PVD-Beschichtungen durch Plasmabehandlung mit gitterlosen Anode-Layer-Source-Ionenquellen
Materials
2006

Elastic TiN coating deposited on polyurethane by pulsed laser

Authors Major, R.; Bonarski, Jan; Morgiel, Jerzy; Major, B.; Czarnowska, Elzbieta; Kustosz, Roman; Lackner, Juergen M; Waldhauser, W.
Elastic TiN coating deposited on polyurethane by pulsed laser
Materials
2006

Biocompatibile TiN-based novel nanocrystalline films

Authors Ebner, R; Lackner, Juergen M; Waldhauser, W.; Major, R; Czarnowska, Elzbieta; Kustosz, Roman; Lacki, P; Major, B
Biocompatibile TiN-based novel nanocrystalline films
Materials
2006

Nanocrystalline Cr/CrN and Ti/TiN multilayer coatings produced by pulsed laser deposition at room temperature

Authors Lackner, Juergen M; Waldhauser, W.; MAJOR, L.; Morgiel, Jerzy; Kot, Marcin; MAJOR, B.
Nanocrystalline Cr/CrN and Ti/TiN multilayer coatings produced by pulsed laser deposition at room temperature
Materials
2006

Benchmarking of pulsed laser deposition versus other PVD techniques

Authors Waldhauser, W.; Lackner, Juergen M
Benchmarking of pulsed laser deposition versus other PVD techniques
Materials
2006

Spectroelectrochemical Characterization and Application of Multireflection IR-ATR Waveguides coated with IR-transparent Doped DLC Electrodes

Authors Menegazzo, Nicola; Waldhauser, W.; Mizaikoff, Boris
Spectroelectrochemical Characterization and Application of Multireflection IR-ATR Waveguides coated with IR-transparent Doped DLC Electrodes
Materials
2006

Growth structure and growth defects in pulsed laser deposited Cr–CrNx–CrCxN1−x multilayer coatings

Authors Lackner, Juergen M; Waldhauser, W.; Major, B.; Morgiel, Jerzy; Major, L.; Heishichiro, Takahashi; Shibayama, T.
Growth structure and growth defects in pulsed laser deposited Cr–CrNx–CrCxN1−x multilayer coatings
Materials
2006

Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)

Authors Major, L.; Morgiel, Jerzy; Major, B.; Lackner, Juergen M; Waldhauser, W.; Ebner, R.; Nistor, Leona; van Tendeloo, Gustaaf
Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)
Materials
2006

Interface growth morphologies in pulsed laser deposited, room temperature grown multilayer hard coatings

Authors Lackner, Jürgen M.; Waldhauser, Wolfgang; Major, Roman; Major, Lukasz; Major, Boguslaw
Interface growth morphologies in pulsed laser deposited, room temperature grown multilayer hard coatings
Materials
2006

Film growth phenomena in high-energetic room temperature pulsed laser deposition on polymer surfaces

Authors Lackner, Jürgen M.; Waldhauser, Wolfgang; Schöberl, Thomas
Film growth phenomena in high-energetic room temperature pulsed laser deposition on polymer surfaces
Materials
2005

Influences of the nitrogen content on the morphological, chemical and optical properties of pulsed laser deposited silicon nitride thin films

Authors Lackner, Juergen M; Waldhauser, W.; Berghauser, R.; Ebner, R.; Beutl, M.; Jakopic, G.; Leising, Guenther; Hutter, H.; Rosner, M.; Schöberl, Thomas
Influences of the nitrogen content on the morphological, chemical and optical properties of pulsed laser deposited silicon nitride thin films
Materials
2005

Structure and biocompatibility of titanium nitride coatings on polyurethane produced by laser ablation

Authors Major, R.; Czarnowska, Elzbieta; Sowińska, Agnieszka; Kustosz, Roman; Lackner, Juergen M; Waldhauser, W.; Wozniak, Michal; Wierzchoń, T.; Major, B.
Structure and biocompatibility of titanium nitride coatings on polyurethane produced by laser ablation
Materials
2005

Vacuum coating - Some like it cold - Part 2- Ambient temperature coating concepts for wide-ranging applications

Authors Lackner, Juergen M; Waldhauser, W.
Vacuum coating - Some like it cold - Part 2- Ambient temperature coating concepts for wide-ranging applications
Materials
2005

Growth phenomena in room temperature pulsed laser deposited chromium and chromium nitride coatings

Authors Lackner, Juergen M.; Waldhauser, W.; Berghauser, R.; Ebner, R.; Kothleitner, G.
Growth phenomena in room temperature pulsed laser deposited chromium and chromium nitride coatings
Materials
2004

Contribution of pulsed laser deposition conditions to texture, morphology and residual stresses developed in TiN thin layers

Authors Major, B.; Bonarski, Jan; Waldhauser, W.; Lackner, Juergen M; Ebner, R.
Contribution of pulsed laser deposition conditions to texture, morphology and residual stresses developed in TiN thin layers
Materials
2004

Pulsed laser deposition of silicon containing carbon thin films

Authors Lackner, Juergen M; Waldhauser, W.; Ebner, R.; Fian, Alexander; Jakopic, G.; Leising, Guenther; Schöberl, Thomas
Pulsed laser deposition of silicon containing carbon thin films
Materials
2004

Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications

Authors Lackner, Juergen M; Waldhauser, W.; Ebner, R.; Keckes, Jozef; Schöberl, Thomas
Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications
Materials
2004

Direct Analysis of Oxidizing Agents in Aqueous Solution with Attenuated Total Reflectance Mid-Infrared Spectroscopy and Diamond-like Carbon Protected Waveguides

Authors Janotta, Markus; Vogt, Frank; Voraberger, Hannes-Stefan; Waldhauser, W.; Lackner, Juergen M; Stotter, Christoph; Beutl, Michael; Mizaikoff, Boris
Direct Analysis of Oxidizing Agents in Aqueous Solution with Attenuated Total Reflectance Mid-Infrared Spectroscopy and Diamond-like Carbon Protected Waveguides
Materials
2004

Pulsed laser deposition of advanced titanium nitride thin layers

Authors Major, B.; Mróz, Waldemar; Wierzchoń, T.; Waldhauser, W.; Lackner, Juergen M; Ebner, R.
Pulsed laser deposition of advanced titanium nitride thin layers
Materials
2004

Pulsed laser deposition of titanium oxide coatings at room temperature—structural, mechanical and tribological properties

Authors Lackner, Juergen M; Waldhauser, W.; Ebner, R.; Major, B.; Schöberl, Thomas
Pulsed laser deposition of titanium oxide coatings at room temperature—structural, mechanical and tribological properties
Zu allen Publikationen

Shaping the future, together

JOANNEUM RESEARCH provides innovation and technology services in the field of applied research. As a research company working on behalf of various federal provinces and regions in Austria, our expertise shapes the development of our modern society and economy – sustainably, and always with a focus on people. As a multidisciplinary team working in a flexible set-up that fosters innovation, we always live up to the highest social and scientific standards.

CONTACT
JOANNEUM RESEARCH
Forschungsgesellschaft mbH

Leonhardstrasse 59, A-8010 Graz
+43 316 876-0
info@joanneum.at
Linkedin Profile
Facebook Profile
Youtube Profile
ResearchGate Profile
Instagram Profile
Bluesky Profile
Follow us!

SERVICES

Links

Zum Inhalt springen