Zurück zur Startseite
  • search Suche öffnen
  • AA
  • Menü menu
  • menu Menü öffnen

DI Dr. Jürgen Lackner

Forschungsgruppe

MATERIALS:

Laser- und Plasma-Technologien

Telefon

+43 316 876-3305

E-Mail

Juergen.Lackner@joanneum.at

Adresse

Leobner Straße 94a, 8712, Niklasdorf
+43 316 876-3304
MATERIALSNiklasdorf-Sek@joanneum.at

Publikationen

Materials
2025

Cerium-containing hexamethyldisiloxane coatings for corrosion protection of a laser-based powder bed fusion fabricated AlSi10Mg0.3 alloy

Autor*innen: Mirjam Spuller, Nina Kovač, Peter Rodič, Lukasz Major, Simon Chwatal, Mattia Cabrioli, Matteo Vanazzi, Giorgio De Pasquale, Juergen M. Lackner, Reinhard Kaindl, Wolfgang Waldhauser,
Cerium-containing hexamethyldisiloxane coatings for corrosion protection of a laser-based powder bed fusion fabricated AlSi10Mg0.3 alloy
Materials
2024

Microstructural and micromechanical characteristics of composite osteoconductive coatings deposited by the atmospheric pressure plasma technique

Autor*innen: Major L, Kopp DF, Major R, Lackner JM.
Microstructural and micromechanical characteristics of composite osteoconductive coatings deposited by the atmospheric pressure plasma technique
Materials
2024

Characterization of atmospheric pressure plasma deposited (APPD) coatings to improve the friction behavior of thermoplastic surfaces

Autor*innen: Gleirscher Milena, Kopp Dietmar, Hausberger Andreas, Angerer Paul, Lackner Jürgen, Schlögl Sandra
Characterization of atmospheric pressure plasma deposited (APPD) coatings to improve the friction behavior of thermoplastic surfaces
Materials
2024

Corrosion protection of additive manufactured AlSi10Mg0.3 using PMMA-siloxane silica sol-gel coating

Autor*innen: Kovač, Nina & Spuller, Mirjam & Kapun, Barbara & Milošev, Ingrid & Lackner, Juergen & Kaindl, Reinhard & Waldhauser, W. & Cabrioli, Mattia & Pasquale, Giorgio & Rodič, Peter
Corrosion protection of additive manufactured AlSi10Mg0.3 using PMMA-siloxane silica sol-gel coating
Materials
2023

Development of Ternary Atmospheric Plasma Deposited Coatings Generated Under Low Oxygen Conditions with Low-Friction Properties on Thermoplastic Surfaces

Autor*innen: Kopp, Dietmar; Gleirscher, Milena; Stummer, Maximilian; Major, Łukasz; Hausberger, Andreas; Schlögl, Sandra; Lackner, Jürgen; Kaindl, Reinhard; Prethaler, Thomas; Coclite, Anna; Waldhauser, W.
Development of Ternary Atmospheric Plasma Deposited Coatings Generated Under Low Oxygen Conditions with Low-Friction Properties on Thermoplastic Surfaces
Materials
2023

Wear mechanisms description in nanoscale by SEM/TEM of multilayer Zr/ZrN coatings in dependence on phases ratio

Autor*innen: Major, L.; Lackner, J. M.; Kot, M.; Major, R.; Dyner, M.; Major, B.
Wear mechanisms description in nanoscale by SEM/TEM of multilayer Zr/ZrN coatings in dependence on phases ratio
Materials
2023

Single- and Multilayer Build-Up of an Antibacterial Temperature- and UV-Curing Sol–Gel System with Atmospheric Pressure Plasma

Autor*innen: Chwatal, Simon; Pölzl, Sabine; Kittinger, Clemens; Lackner, Jürgen; Coclite, Anna; Waldhauser, W.
Single- and Multilayer Build-Up of an Antibacterial Temperature- and UV-Curing Sol–Gel System with Atmospheric Pressure Plasma
Materials
2023

Morphology-controlled atmospheric pressure plasma synthesis of zinc oxide nanoparticles for piezoelectric sensors

Autor*innen: Schwan, A.; Chwatal, Simon; Hendler, C.; Kopp, Dietmar; Lackner, Juergen M; Kaindl, Reinhard; Tscherner, M.; Zirkl, M.; Angerer, P.; Friessnegger, Bernhard; Augl, S.; Heim, D.; Hinterer, A.; Stummer, Maximilian; Waldhauser, W.
Morphology-controlled atmospheric pressure plasma synthesis of zinc oxide nanoparticles for piezoelectric sensors
Materials
2023

Determination of Cyclic Load Limits for Plasma-Sprayed Copper Tracks on Material Extrusion-Based Printed Surfaces

Autor*innen: Stiller, Tanja; Hausberger, Andreas; Berer, Michael; Schwan, Alexander M.; Hinterer, Andreas; Spalt, Sebastian; Pinter, Gerald; Lackner, Jürgen M.
Determination of Cyclic Load Limits for Plasma-Sprayed Copper Tracks on Material Extrusion-Based Printed Surfaces
Produktion und Fertigung +
2023

Characterization of biomaterials with reference to biocompatibility dedicated for patient-specific finger implants

Autor*innen: Byrski A, Kopernik M, Major Ł, Kasperkiewicz K, Dyner M, Lackner JM, Lumenta DB, Major R.
Characterization of biomaterials with reference to biocompatibility dedicated for patient-specific finger implants
Materials
2023

In Vitro and In Vivo Testing of Stereolithography (SLA)-Manufactured Haemocompatible Photopolymers for Blood Pump

Autor*innen: Major, R.; Gawlikowski, M.; Surmiak, M.; Janiczak, K.; Więcek, J.; Kurtyka, P.; Schwentenwein, M.; Jasek-Gajda, E.; Kopernik, M.; Lackner, J.M.
In Vitro and In Vivo Testing of Stereolithography (SLA)-Manufactured Haemocompatible Photopolymers for Blood Pump
Materials
2023

Determination of Cyclic Load Limits for Plasma‐Sprayed Copper Tracks on Material Extrusion‐Based Printed Surfaces. Advanced engineering materials

Autor*innen: Stiller, T., Hausberger, A., Berer, M., Schwan, A. M., Hinterer, A., Spalt, S., ... & Lackner, J. M.
Determination of Cyclic Load Limits for Plasma‐Sprayed Copper Tracks on Material Extrusion‐Based Printed Surfaces. Advanced engineering materials
Materials
2023

Evaluation of In Vivo Biocompatibility in Preclinical Studies of a Finger Implant Medical Device Correlated with Mechanical Properties and Microstructure

Autor*innen: Major, R., Grajoszek, A., Byrski, A., Szawiraacz, K., Barski, J. J., Major, Ł., ... & Lackner, J. M.
Evaluation of In Vivo Biocompatibility in Preclinical Studies of a Finger Implant Medical Device Correlated with Mechanical Properties and Microstructure
Materials
2023

Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structure

Autor*innen: Dietmar Kopp, Milena Gleirscher, Maximilian Stummer, Lukasz Major, Andreas Hausberger, Sandra Schlögl, Jürgen M. Lackner, Reinhard Kaindl, Thomas Prethaler, Anna Maria Coclite, Wolfgang Waldhauser
Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structure
Materials
2022

X-ray elastic constants determined by the combination of sin2 ensuremathpsi and substrate-curvature methods

Autor*innen: Eiper, Ernst; Martinschitz, Klaus J.; Gerlach, Jürgen W.; Lackner, Jürgen M.; Zizak, Ivo; Darowski, Nora; Keckes, Jozef
X-ray elastic constants determined by the combination of sin2 ensuremathpsi and substrate-curvature methods
Materials
2022

Antimicrobial materials with improved efficacy dedicated to large craniofacial bone defects after tumor resection.

Autor*innen: Major, Roman; Surmiak, Marcin; Kasperkiewicz, Katarzyna; Kaindl, Reinhard; Byrski, Adam; Major, Łukasz; Russmueller, Guenter; Moser, Doris; Kopernik, Magdalena; Lackner, Juergen M.
Antimicrobial materials with improved efficacy dedicated to large craniofacial bone defects after tumor resection.
Materials
2022

Low-friction, wear-protecting coatings on polymers by atmospheric pressure plasma spraying

Autor*innen: Kopp, Dietmar; Lackner, Jürgen M.; Kaindl, Reinhard; Elter, Roswitha; Stummer, Maximilian; Hinterer, Andreas; Coclite, Anna Maria; Waldhauser, Wolfgang
Low-friction, wear-protecting coatings on polymers by atmospheric pressure plasma spraying
Materials
2022

Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristics

Autor*innen: Stiller, T.; Berer, M.; Katta, A. D. Kashyap; Haar, B.; Truszkiewicz, E.; Kraschitzer, W.; Stepanvosky, H.; Pinter, G.; Lackner, J. M.
Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristics
Materials
2022

Atomic layer deposition of oxide coatings on porous metal and polymer structures fabricated by additive manufacturing methods (laser-based powder bed fusion, material extrusion, material jetting)

Autor*innen: Kaindl, Reinhard; Homola, Tomáš; Rastelli, Armando; Schwarz, Albin; Tarre, Aivar; Kopp, Dietmar; Coclite, Anna Maria; Görtler, Michael; Meier, Benjamin; Prettenthaler, Bernd; Belegratis, Maria; Lackner, Jürgen M.; Waldhauser, Wolfgang
Atomic layer deposition of oxide coatings on porous metal and polymer structures fabricated by additive manufacturing methods (laser-based powder bed fusion, material extrusion, material jetting)
Materials
2021

Antimicrobial Activity of a Novel Cu(NO3)2-Containing Sol-Gel Surface under Different Testing Conditions

Autor*innen: Toplitsch, Daniela; Lackner, Jürgen Markus; Schwan, Alexander Michael; Hinterer, Andreas; Stögmüller, Philipp; Horn, Kerstin; Fritzlar, Natalie; Pfuch, Andreas; Kittinger, Clemens
Antimicrobial Activity of a Novel Cu(NO3)2-Containing Sol-Gel Surface under Different Testing Conditions
Materials
2021

In vitro haemocompatibility assessment of acrylic acid deposited on solid, polyurethane substrate.

Autor*innen: Major, Roman; Kopernik, Magdalena; Kuźmińska, Aleksandra; Imbir, Gabriela; Plutecka, Hanna; Pomorska, Małgorzata; Ciach, Tomasz; Lackner, Juergen Markus
In vitro haemocompatibility assessment of acrylic acid deposited on solid, polyurethane substrate.
Materials
2021

Biocompatibility testing of composite biomaterial designed for a new petal valve construction for pulsatile ventricular assist device

Autor*innen: Major, Roman; Gawlikowski, Maciej; Plutecka, Hanna; Surmiak, Marcin; Kot, Marcin; Dyner, Marcin; Lackner, Juergen M.; Major, Boguslaw
Biocompatibility testing of composite biomaterial designed for a new petal valve construction for pulsatile ventricular assist device
Materials
2021

Effect of the mechanical properties of carbon-based coatings on the mechanics of cell–material interactions

Autor*innen: Trembecka-Wójciga, K.; Kopernik, M.; Surmiak, M.; Major, R.; Gawlikowski, M.; Bruckert, F.; Kot, M.; Lackner, J. M.
Effect of the mechanical properties of carbon-based coatings on the mechanics of cell–material interactions
Materials
2021

Antibacterial Optimization of Highly Deformed Titanium Alloys for Spinal Implants

Autor*innen: Kasperkiewicz, Katarzyna; Major, Roman; Sypien, Anna; Kot, Marcin; Dyner, Marcin; Major, Łukasz; Byrski, Adam; Kopernik, Magdalena; Lackner, Juergen M.
Antibacterial Optimization of Highly Deformed Titanium Alloys for Spinal Implants
Materials
2020

Nanoscale characterization of corrosion mechanisms in advanced Zr/ZrxN and Zr/ZrxN+a-C:H nano-multilayer coatings for medical tools

Autor*innen: Major, L.; Krawiec, H.; Lackner, J. M.; Dyner, M.; Grysakowski, B.; Major, B.
Nanoscale characterization of corrosion mechanisms in advanced Zr/ZrxN and Zr/ZrxN+a-C:H nano-multilayer coatings for medical tools
Materials
2020

Nanostructural aspects of the wear process of multilayer tribological coatings

Autor*innen: Major, Lukasz; Lackner, Juergen M.; Kot, Marcin; Major, Boguslaw
Nanostructural aspects of the wear process of multilayer tribological coatings
Materials
2020

Rolling or Two-Stage Aggregation of Platelets on the Surface of Thin Ceramic Coatings under in Vitro Simulated Blood Flow Conditions

Autor*innen: Mzyk, Aldona; Imbir, Gabriela; Trembecka-Wójciga, Klaudia; Lackner, Juergen M.; Plutecka, Hanna; Jasek-Gajda, Ewa; Kawałko, Jakub; Major, Roman
Rolling or Two-Stage Aggregation of Platelets on the Surface of Thin Ceramic Coatings under in Vitro Simulated Blood Flow Conditions
Materials
2020

Design, Manufacturing Technology and In-Vitro Evaluation of Original, Polyurethane, Petal Valves for Application in Pulsating Ventricular Assist Devices.

Autor*innen: Major, Roman; Gawlikowski, Maciej; Sanak, Marek; Lackner, Juergen M.; Kapis, Artur
Design, Manufacturing Technology and In-Vitro Evaluation of Original, Polyurethane, Petal Valves for Application in Pulsating Ventricular Assist Devices.
Materials
2020

Patient specific implants for jawbone reconstruction after tumor resection

Autor*innen: Major, Roman; Kowalczyk, Piotr; Surmiak, Marcin; Łojszczyk, Ilona; Podgórski, Rafał; Trzaskowska, Paulina; Ciach, Tomasz; Russmueller, Guenter; Kasperkiewicz, Katarzyna; Major, Łukasz; Jabłoński, Robert; Kropiwnicki, Jacek; Lackner, Juergen M.
Patient specific implants for jawbone reconstruction after tumor resection
Materials
2020

Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering

Autor*innen: Khudiakova, A.; Berer, M.; Niedermair, S.; Plank, B.; Truszkiewicz, E.; Meier, G.; Stepanovsky, H.; Wolfahrt, M.; Pinter, G.; Lackner, J.
Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering
Materials
2019

Tailored Al2O3-Al2TiO5-TiO2 Composite Ceramics from different Titanium Precursors

Autor*innen: Dittert, B.; Wiessner, M.; Angerer, P.; Lackner, J. M.; Leichtfried, H.
Tailored Al2O3-Al2TiO5-TiO2 Composite Ceramics from different Titanium Precursors
Materials
2019

An Analysis of Mechanical and Tribological Properties of Zr/Zr2N Multilayer Coatings

Autor*innen: Kot, Marcin; Lackner, Jurgen; Major, Łukasz; Szczęch, Marcin; Wiązania, Grzegorz; Zimowski, Sławomir
An Analysis of Mechanical and Tribological Properties of Zr/Zr2N Multilayer Coatings
Materials
2019

Correlative microscopic characterization of biomechanical and biomimetic advanced CVD coatings on a PEEK substrate

Autor*innen: Major, L.; Lackner, J. M.; Kot, M.; Major, B.
Correlative microscopic characterization of biomechanical and biomimetic advanced CVD coatings on a PEEK substrate
Materials
2018

Material engineering in cardiovascular reconstruction

Autor*innen: Major, R.; Lackner, J. M.; Gonsior, M.; Plutecka, H.
Material engineering in cardiovascular reconstruction
Materials
2018

Ex situ and in situ nanoscale wear mechanisms characterization of Zr/ZrxN tribological coatings

Autor*innen: Major, L.; Major, R.; Kot, M.; Lackner, J. M.; Major, B.
Ex situ and in situ nanoscale wear mechanisms characterization of Zr/ZrxN tribological coatings
Materials
2018

Anode layer source plasma-assisted hybrid deposition and characterization of diamond-like carbon coatings deposited on flexible substrates

Autor*innen: Thirumalai, S.; Hausberger, A.; Lackner, J. M.; Waldhauser, W.; Schwarz, T.
Anode layer source plasma-assisted hybrid deposition and characterization of diamond-like carbon coatings deposited on flexible substrates
Materials
2018

Wear Mechanisms Characterization Operating in Micro- and Nanoscale of the a-C:H Coating Implanted by Ag-Pt

Autor*innen: Janusz, M.; Major, L.; Kot, M.; Dyner, M.; Lackner, J. M.; Major, B.
Wear Mechanisms Characterization Operating in Micro- and Nanoscale of the a-C:H Coating Implanted by Ag-Pt
Materials
2017

Biomimetics in thin film design: Niche-like wrinkles designed for i-cell progenitor cell differentiation

Autor*innen: Major, Roman; Lackner, Juergen M.; Sanak, Marek; Major, Boguslaw
Biomimetics in thin film design: Niche-like wrinkles designed for i-cell progenitor cell differentiation
Materials
2017

Effects of the surface modification of polyurethane substrates on genotoxicity and blood activation processes

Autor*innen: Major, Roman; Plutecka, Hanna; Gruszczynska, Anna; Lackner, Juergen M.; Major, Boguslaw
Effects of the surface modification of polyurethane substrates on genotoxicity and blood activation processes
Materials
2017

Wear mechanisms of the biotribological nanocomposite a-C : H coatings implanted by metallic nanoparticles

Autor*innen: MAJOR, L.; JANUSZ, M.; LACKNER, J.M.; KOT, M.; DYNER, M.; MAJOR, B.
Wear mechanisms of the biotribological nanocomposite a-C : H coatings implanted by metallic nanoparticles
Materials
2017

Biodegradation of anti-microbial titanium-magnesium-silver coatings on polyetheretherketone for bone-contact applications

Autor*innen: Gümüş, Serap; Polat, Şeyda; Waldhauser, Wolfgang; Lackner, Juergen M.
Biodegradation of anti-microbial titanium-magnesium-silver coatings on polyetheretherketone for bone-contact applications
Materials
2017

Microstructure characterization of localized corrosion wear of Cr/Cr2N+ a-C:H/a-C:H:Cr multilayer coatings on carbon fiber composites

Autor*innen: Janusz, M.; Major, L.; Lackner, J. M.; Grysakowski, B.; Krawiec, H.
Microstructure characterization of localized corrosion wear of Cr/Cr2N+ a-C:H/a-C:H:Cr multilayer coatings on carbon fiber composites
Materials
2017

Diamond-like carbon coatings with zirconium-containing interlayers for orthopedic implants

Autor*innen: Choudhury, Dipankar; Lackner, Juergen; Fleming, Robert A.; Goss, Josh; Chen, Jingyi; Zou, Min
Diamond-like carbon coatings with zirconium-containing interlayers for orthopedic implants
Materials
2016

Bio-tribological properties and microstructure characterization of the polytetrafluorethylene (PTFE) coatings on polyaryletheretherketone (PEEK) substrate

Autor*innen: Major, Lukasz; Lackner, Juergen Markus; Kot, Marcin; Major, Boguslaw
Bio-tribological properties and microstructure characterization of the polytetrafluorethylene (PTFE) coatings on polyaryletheretherketone (PEEK) substrate
Materials
2016

Contribution of Titanium, Chromium and Carbon Buffer Interlayers to Bio-Tribological Properties of Multilayer Composites

Autor*innen: Major, Ł; Janusz, M.; Lackner, J. M.; Major, B.
Contribution of Titanium, Chromium and Carbon Buffer Interlayers to Bio-Tribological Properties of Multilayer Composites
Materials
2016

Effect of the type of elastomeric substrate on the microstructural, surface and tribological characteristics of diamond-like carbon (DLC) coatings

Autor*innen: Thirumalai, S.; Hausberger, A.; Lackner, J. M.; Waldhauser, W.; Schwarz, Th
Effect of the type of elastomeric substrate on the microstructural, surface and tribological characteristics of diamond-like carbon (DLC) coatings
Materials
2016

In vitro hemocompatibility on thin ceramic and hydrogel films deposited on polymer substrate performed in arterial flow conditions

Autor*innen: Major, Roman; Trembecka-Wójciga, Klaudia; Kot, Marcin; Lackner, Juergen M.; Wilczek, Piotr; Major, Boguslaw
In vitro hemocompatibility on thin ceramic and hydrogel films deposited on polymer substrate performed in arterial flow conditions
Materials
2016

Structural, chemical and nanomechanical investigations of SiC/polymeric a-C:H films deposited by reactive RF unbalanced magnetron sputtering

Autor*innen: Tomastik, C.; Lackner, J. M.; Pauschitz, A.; Roy, M.
Structural, chemical and nanomechanical investigations of SiC/polymeric a-C:H films deposited by reactive RF unbalanced magnetron sputtering
Materials
2016

Microstructure characterization of advanced protective Cr/CrN+a-C:H/a-C:H:Cr multilayer coatings on carbon fibre composite (CFC)

Autor*innen: MAJOR, L.; JANUSZ, M.; LACKNER, J. M.; K. O. T., M.; MAJOR, B.
Microstructure characterization of advanced protective Cr/CrN+a-C:H/a-C:H:Cr multilayer coatings on carbon fibre composite (CFC)
Materials
2016

Polyelectrolyte multilayer film modification for chemo-mechano-regulation of endothelial cell response

Autor*innen: Mzyk, A.; Lackner, J. M.; Wilczek, P.; Lipińska, L.; Niemiec-Cyganek, A.; Samotus, A.; Morenc, M.
Polyelectrolyte multilayer film modification for chemo-mechano-regulation of endothelial cell response
Materials
2016

Mechanical and Tribological Properties of Carbon-Based Graded Coatings

Autor*innen: Kot, M.; Major, L.; Lackner, J. M.; Chronowska-Przywara, K.; Janusz, M.; Rakowski, W.
Mechanical and Tribological Properties of Carbon-Based Graded Coatings
Materials
2016

A novel functional layered diamond like carbon coating for orthopedics applications

Autor*innen: Choudhury, Dipankar; Morita, Takehiro; Sawae, Yoshinori; Lackner, Jürgen M.; Towler, Mark; Krupka, Ivan
A novel functional layered diamond like carbon coating for orthopedics applications
Materials
2015

Development and complex characterization of bio-tribological Cr/CrN + a-C:H (doped Cr) nano-multilayer protective coatings for carbon–fiber-composite materials

Autor*innen: Major, L.; Janusz, M.; Kot, M.; Lackner, J. M.; Major, B.
Development and complex characterization of bio-tribological Cr/CrN + a-C:H (doped Cr) nano-multilayer protective coatings for carbon–fiber-composite materials
Materials
2015

Biomechanical properties of the thin PVD coatings defined by red blood cells

Autor*innen: Trembecka-Wojciga, K.; Major, R.; Lackner, J. M.; Bruckert, F.; Jasek, E.; Major, B.
Biomechanical properties of the thin PVD coatings defined by red blood cells
Materials
2015

Mechanical properties of atomic layer deposited Al2O3/ZnO nanolaminates

Autor*innen: Homola, Tomáš; Buršíková, Vilma; Ivanova, Tatiana V.; Souček, Pavel; Maydannik, Philipp S.; Cameron, David C.; Lackner, Jürgen M.
Mechanical properties of atomic layer deposited Al2O3/ZnO nanolaminates
Materials
2015

Thrombogenicity and biocompatibility studies of reduced graphene oxide modified acellular pulmonary valve tissue

Autor*innen: Wilczek, Piotr; Major, Roman; Lipinska, Ludwika; Lackner, Juergen; Mzyk, Aldona
Thrombogenicity and biocompatibility studies of reduced graphene oxide modified acellular pulmonary valve tissue
Materials
2015

Adhesion of Cr/CrN Multilayers to Steel Substrates

Autor*innen: Kot, Marcin; Chronowska-Przywara, Kinga; Major, Łukasz; Lackner, Juergen
Adhesion of Cr/CrN Multilayers to Steel Substrates
Materials
2015

Computer engineering in designing and fabrication of tissue analogue-type coating dedicated for the cardiovascular regeneration

Autor*innen: Trembecka-Wojciga, K.; Major, R.; Bruckert, F.; Lackner, J. M.; Lacki, P.; Sanak, M.; Major, B.
Computer engineering in designing and fabrication of tissue analogue-type coating dedicated for the cardiovascular regeneration
Materials
2015

Nano-wrinkling of diamond-like carbon thin films on amorphous polycarbonate and semicrystalline polyethylene terephthalate

Autor*innen: Lackner, J. M.; Gumus, S.; Polat, S.; Waldhauser, W.
Nano-wrinkling of diamond-like carbon thin films on amorphous polycarbonate and semicrystalline polyethylene terephthalate
Materials
2015

Effect of the silicon carbide nanoparticles introduction on biological properties of porous polymer coatings

Autor*innen: Mzyk, A.; Major, R.; Lackner, J. M.; Bruckert, F.; Wilczek, P.; Major, B.
Effect of the silicon carbide nanoparticles introduction on biological properties of porous polymer coatings
Materials
2015

Novel multilayer nano-composite protective coatings for metallic medical tools

Autor*innen: Major, Lukasz; Lackner, Juergen M.; Kot, Marcin; Morgiel, Jerzy
Novel multilayer nano-composite protective coatings for metallic medical tools
Materials
2015

Roughness Influence On Macro- And Micro-Tribology Of Multi-Layered Hard Coatings On Carbon Fibre Polymer Composite

Autor*innen: J.M, Lackner; B, Major; W, Waldhauser; A, Mzyk; Ł, Major; M, Kot
Roughness Influence On Macro- And Micro-Tribology Of Multi-Layered Hard Coatings On Carbon Fibre Polymer Composite
Materials
2015

Dry And Ringer Solution Lubricated Tribology Of Thin Osseoconductive Metal Oxides And Diamond-Like Carbon Films

Autor*innen: W, Waldhauser; M, Lackner J.; M, Kot; B, Major
Dry And Ringer Solution Lubricated Tribology Of Thin Osseoconductive Metal Oxides And Diamond-Like Carbon Films
Materials
2014

Surface treatment of thin-film materials to allow dialogue between endothelial and smooth muscle cells and the effective inhibition of platelet activation

Autor*innen: Major, Roman; Bruckert, Franz; Lackner, Juergen M.; Marczak, Jan; Major, Boguslaw
Surface treatment of thin-film materials to allow dialogue between endothelial and smooth muscle cells and the effective inhibition of platelet activation
Materials
2014

Plasma Polymerization Inside Tubes in Hexamethyldisiloxanes and Ethyne Glow Discharges: Effects of Deposition Atmosphere on Wetting and Ageing in Solvents

Autor*innen: Lackner, Juergen M.; Wiesinger, Martin; Kaindl, Reinhard; Waldhauser, Wolfgang; Heim, Daniel; Hartmann, Paul
Plasma Polymerization Inside Tubes in Hexamethyldisiloxanes and Ethyne Glow Discharges: Effects of Deposition Atmosphere on Wetting and Ageing in Solvents
Materials
2014

The advantages of incorporating CrxC nanograins into an a-C:H matrix in tribological coatings

Autor*innen: Kot, M.; Major, Ł; Chronowska-Przywara, K.; Lackner, J. M.; Waldhauser, W.; Rakowski, W.
The advantages of incorporating CrxC nanograins into an a-C:H matrix in tribological coatings
Materials
2014

Thermal behaviour of chromium nitride/titanium–titanium carbonitride multilayers

Autor*innen: Angerer, P.; Lackner, J. M.; Wiessner, M.; Maier, G. A.; Major, L.
Thermal behaviour of chromium nitride/titanium–titanium carbonitride multilayers
Materials
2014

Tribology and Micromechanics of Chromium Nitride Based Multilayer Coatings on Soft and Hard Substrates

Autor*innen: Lackner, Juergen M.; Waldhauser, Wolfgang; Major, Lukasz; Kot, Marcin
Tribology and Micromechanics of Chromium Nitride Based Multilayer Coatings on Soft and Hard Substrates
Materials
2014

Contribution of TiN/Ti/a-C:H multilayers architecture to biological and mechanical properties

Autor*innen: Major, L.; Lackner, J. M.; Kot, M.; Janusz, M.; Major, B.
Contribution of TiN/Ti/a-C:H multilayers architecture to biological and mechanical properties
Materials
2014

Growth of biomimetic films - influences of polymer topography and phase structure

Autor*innen: Lackner, Juergen M.; Gümüş, Serap; Polat, Seyda; Major, Lukasz; Waldhauser, Wolfgang
Growth of biomimetic films - influences of polymer topography and phase structure
Materials
2014

Wieloskalowa analiza mechanizmu zużycia wielowarstwowych powłok na bazie tytanu i węgla

Autor*innen: Major, Ł.; Lackner, J. M.; Major, B.
Wieloskalowa analiza mechanizmu zużycia wielowarstwowych powłok na bazie tytanu i węgla
Materials
2014

Bio-tribological TiN/Ti/a-C : H multilayer coatings development with a built-in mechanism of controlled wear

Autor*innen: Major, L.; Lackner, J. M.; Major, B.
Bio-tribological TiN/Ti/a-C : H multilayer coatings development with a built-in mechanism of controlled wear
Materials
2014

Bio-mimetic design for surface protection of plastic materials based on properties of human skin

Autor*innen: Lackner, Juergen M; Waldhauser, W.
Bio-mimetic design for surface protection of plastic materials based on properties of human skin
Materials
2014

Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites

Autor*innen: Lackner, Juergen M.; Waldhauser, Wolfgang; Ganser, Christian; Teichert, Christian; Kot, Marcin; Major, Lukasz
Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites
Materials
2013

Effect of Interfaces on Mechanical Properties of Ceramic/Metal Multilayers

Autor*innen: Kot, Marcin; Major, Łukasz; Lackner, Juergen M; Rakowski, Wiesław
Effect of Interfaces on Mechanical Properties of Ceramic/Metal Multilayers
Materials
2013

TRIBOLOGY OF BIO-INSPIRED NANOWRINKLED FILMS ON ULTRASOFT SUBSTRATES

Autor*innen: Lackner, Juergen M.; Waldhauser, Wolfgang; Major, Lukasz; Teichert, Christian; Hartmann, Paul
TRIBOLOGY OF BIO-INSPIRED NANOWRINKLED FILMS ON ULTRASOFT SUBSTRATES
Materials
2013

Chromium/chromium nitride multilayers during thermal treatment: An X-ray diffraction study

Autor*innen: Angerer, P.; Lackner, J. M.; Wiessner, M.; Maier, G. A.
Chromium/chromium nitride multilayers during thermal treatment: An X-ray diffraction study
Materials
2013

WITHDRAWN: Bio-inspired wear protection of soft materials by hard films: Mechanical and tribological properties of nacre and multilayer Ti–TiN films

Autor*innen: Lackner, Juergen M; Waldhauser, W.; Hartmann, P.; Major, L.; Kot, Marcin
WITHDRAWN: Bio-inspired wear protection of soft materials by hard films: Mechanical and tribological properties of nacre and multilayer Ti–TiN films
Materials
2013

A study of the impact of anti-adhesive coatings on the sheet-titanium forming processes

Autor*innen: Adamus, J.; Lackner, J. M.; Major, Ł
A study of the impact of anti-adhesive coatings on the sheet-titanium forming processes
Materials
2013

Multiscaled analysis of wear mechanism of titanium and carbon basis multilayer coatings

Autor*innen: Major, L.; Lackner, Juergen M; Major, B.
Multiscaled analysis of wear mechanism of titanium and carbon basis multilayer coatings
Materials
2013

Inner surface modification of the tube-like elements for medical applications

Autor*innen: Major, Roman; Lackner, Juergen M.; Gorka, Karolina; Wilczek, Piotr; Major, Boguslaw
Inner surface modification of the tube-like elements for medical applications
Materials
2013

Gas Permeation, Mechanical Behavior and Cytocompatibility of Ultrathin Pure and Doped Diamond-Like Carbon and Silicon Oxide Films

Autor*innen: Lackner, Juergen M.; Meindl, Claudia; Wolf, Christian; Fian, Alexander; Kittinger, Clemens; Kot, Marcin; Major, Lukasz; Czibula, Caterina; Teichert, Christian; Waldhauser, Wolfgang; Weinberg, Annelie-Martina; Fröhlich, Eleonore
Gas Permeation, Mechanical Behavior and Cytocompatibility of Ultrathin Pure and Doped Diamond-Like Carbon and Silicon Oxide Films
Materials
2013

Plastic deformation in nano-scale multilayer materials — A biomimetic approach based on nacre

Autor*innen: Lackner, Juergen M.; Waldhauser, Wolfgang; Major, Boguslaw; Major, Lukasz; Kot, Marcin
Plastic deformation in nano-scale multilayer materials — A biomimetic approach based on nacre
Materials
2013

The tribological phenomena of a new type of TiN/a-C:H multilayer coatings

Autor*innen: Kot, Marcin; Major, Łukasz; Lackner, Juergen
The tribological phenomena of a new type of TiN/a-C:H multilayer coatings
Materials
2013

Biomimetics in thin film design – Wrinkling and fracture of pulsed laser deposited films in comparison to human skin

Autor*innen: Lackner, J. M.; Waldhauser, W.; Major, R.; Major, L.; Hartmann, P.
Biomimetics in thin film design – Wrinkling and fracture of pulsed laser deposited films in comparison to human skin
Materials
2012

Biomimetik design for cell-contacting surfaces-The topographical influences on cell-biomaterial interaction and plasma-based fabrication methods for self-adapted nanostructures

Autor*innen: Lackner, Jürgen Markus; Waldhauser, Wolfgang; Schmied, Franz; Teichert, Christian; Keckes, Jozef; Kreith, Josef
Biomimetik design for cell-contacting surfaces-The topographical influences on cell-biomaterial interaction and plasma-based fabrication methods for self-adapted nanostructures
Materials
2012

Biologisch-inspirierte Oberflächen für Verschleißschutz und Reibungsminimierung von Kunststoffen - Biomimetische Entwicklung von neuen Materialien basierend auf menschlicher Haut und Perlmutt

Autor*innen: J.M.Lackner, L.Major, W.Waldhauser, M.Kot
Biologisch-inspirierte Oberflächen für Verschleißschutz und Reibungsminimierung von Kunststoffen - Biomimetische Entwicklung von neuen Materialien basierend auf menschlicher Haut und Perlmutt
Materials
2012

Biomimetic approaches for designing blood-contacting surfaces for artificial vessels - a review

Autor*innen: J.M. Lackner, P. Hartmann, W. Waldhauser, R. Major
Biomimetic approaches for designing blood-contacting surfaces for artificial vessels - a review
Materials
2012

Biomimetic design for cell-contacting surfaces

Autor*innen: J.M. Lackner, J. Kreith, W. Waldhauser, P. Hartmann, C. Teichert, F. Schmied, L. Major, J. Keckes
Biomimetic design for cell-contacting surfaces
Materials
2012

Enhancement of mechanical and tribological properties of Ti/TiN multilayers over TiN single layer

Autor*innen: Kot, Marcin; Major, L.; Rakowski, W.; Lackner, Juergen M
Enhancement of mechanical and tribological properties of Ti/TiN multilayers over TiN single layer
Materials
2012

Hemocompatibility of Inorganic Physical Vapor Deposition (PVD) Coatings on Thermoplastic Polyurethane Polymers.

Autor*innen: Lackner, Juergen M.; Waldhauser, Wolfgang; Hartmann, Paul; Bruckert, Franz; Weidenhaupt, Marianne; Major, Roman; Sanak, Marek; Wiesinger, Martin; Heim, Daniel
Hemocompatibility of Inorganic Physical Vapor Deposition (PVD) Coatings on Thermoplastic Polyurethane Polymers.
Materials
2012

Self-assembling (nano-)wrinkling topography formation in low-temperature vacuum deposition on soft polymer surfaces

Autor*innen: Lackner, J. M.; Waldhauser, W.; Hartmann, P.; Miskovics, O.; Schmied, F.; Teichert, C.; Schöberl, T.
Self-assembling (nano-)wrinkling topography formation in low-temperature vacuum deposition on soft polymer surfaces
Materials
2012

TEM Investigations of Wear Mechanisms of Single and Multilayer Coatings

Autor*innen: Major, Lukasz; Lackner, Jurgen M.; Morgiel, Jerzy
TEM Investigations of Wear Mechanisms of Single and Multilayer Coatings
Materials
2012

Vakuumbeschichtung bei Raumtemperatur: F&E zur Funktionalisierung von Oberflächen für Optik, Verschleißschutz und Medizintechnik von temperaturempfindlichen Materialien

Autor*innen: J.M. Lackner, P. Hartmann, W. Waldhauser
Vakuumbeschichtung bei Raumtemperatur: F&E zur Funktionalisierung von Oberflächen für Optik, Verschleißschutz und Medizintechnik von temperaturempfindlichen Materialien
Materials
2011

Identification of material model of TiN using numerical simulation of nanoindentation test

Autor*innen: M. Kopernik, R. Major, A. Milenin; Lackner, J. M.
Identification of material model of TiN using numerical simulation of nanoindentation test
Materials
2011

Microscale interpretation of tribological phenomena in Ti/TiN soft-hard multilayer coatings on soft austenite steel substrates

Autor*innen: Lackner, Juergen M; Major, L; Kot, Marcin
Microscale interpretation of tribological phenomena in Ti/TiN soft-hard multilayer coatings on soft austenite steel substrates
Materials
2011

Plasma modification and deposition on inner tube faces by pulsed DC discharges

Autor*innen: Lackner, Jürgen M.; Kahn, Markus; Waldhauser, Wolfgang
Plasma modification and deposition on inner tube faces by pulsed DC discharges
Materials
2011

Verformungsmechanismen in Ti-TiN-Multilagenbeschichtungen unter tribologischen Beanspruchungen

Autor*innen: J.M. Lackner, B. Major, L. Major, M. Kot, W. Waldhauser
Verformungsmechanismen in Ti-TiN-Multilagenbeschichtungen unter tribologischen Beanspruchungen
Zu allen Publikationen

Miteinander zukunftsrelevant

Die JOANNEUM RESEARCH ist Innovations- und Technologieanbieter im Bereich der angewandten Forschung. Als Forschungsgesellschaft der Länder und Regionen prägen wir mit unseren Forschungskompetenzen die Entwicklung unserer modernen Gesellschaft und Wirtschaft nachhaltig und menschenzentriert. Als multidisziplinäres Team in flexiblen, innovationsfreundlichen Strukturen leben wir höchste gesellschaftliche und wissenschaftliche Ansprüche.

KONTAKT
JOANNEUM RESEARCH
Forschungsgesellschaft mbH

Leonhardstraße 59, A-8010 Graz
+43 316 876-0
info@joanneum.at
Linkedin Profile
Facebook Profile
Youtube Profile
ResearchGate Profile
Instagram Profile
Bluesky Profile
Follow us!

Services

Links

Zum Inhalt springen